Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-12-2013, 04:59 PM
Fr. Frank Fr. Frank is offline
Senior Member
 
Join Date: Oct 2003
Location: Shalimar, Florida
Posts: 2,265
Default

Marada made a variety of boats, primarily for the fresh-water boating market. The hull is a type of variable dead-rise. but the vertical hard chines are more like 14* degrees from vertical, and the outer hard chine actually turns down at the edge. The planing surfaces are decreasing angle of entry, again like the Moesly design, but the inner planing angle is only about 20-21 degree deadrise, and at the keel line, there is a 4" wide flat planing surface.

The photo below is from a 21' Mirada bow rider.

The line drawing is what the hull shape looks like from the rear.
Attached Images
  
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes.

Fr. Frank says:
Jesus liked fishing, too. He even walked on water to get to the boat!

Currently without a SeaCraft
(2) Pompano 12' fishing kayaks
'73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:59 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft