|
|
|
|
#1
12-02-2014, 07:22 PM
|
|||
|
|||
There are some fiberglass hangers built into/below the starboard gunwale. That's where I ran my wires when I redid my boat. I used some thick zip ties and hung off of the mech
steering cable where the wires started to swag. Works good for me.
__________________
1977 SeaCraft 23' Sceptre W/ Alum Tower & Yamaha 225 www.LouveredProductsUnlimited.com 
|
|
#2
12-02-2014, 10:50 PM
|
|||
|
|||
|
You could also use some PVC conduit that's made for running wires. If you ever had a wiring fire, it would tend to keep it away from the fiberglass which is extremely flammable. BTW, I ran the DS transducer wires along the port side on my Seafari, just to keep 'em away from any electrical noise that might be induced by the power wires.
__________________
'72 SeaFari/150E-Tec/Hermco Bracket, owned since 1975. http://i188.photobucket.com/albums/z...Part2019-1.jpg
|
 |
|
|
Hybrid Mode
