|
|
|
|
#1
02-11-2015, 07:54 PM
|
|||
|
|||
Never mind. One cylinder at 60...
|
|
#2
02-13-2015, 08:46 PM
|
|||
|
|||
|
Let me know if you still need someone to look. I have Monday off and might venture down there for another boat part.
|
|
#3
02-14-2015, 08:16 PM
|
|||
|
|||
|
Quote:
I went to look at the bracket and it is not what I thought, but might work with some thought and help from the fine folks at Schmidts welding. Locals they got full penetration on 1/2 inch stock and looked like dimes. They are mostly retired but will work with friendly spirits. There is a hairline crack on the top of the engine mount about 14" and the engine mounting holes are spider cracked a tad with heli coil inserts. May see what it will take to make it a 30" bracket. The tub is not that wide and flat on the bottom. The good news: a 6 ft dive platform and 500 clams. Framing square said 12 degrees. He also had a coffin box which is on my wish list, but he ain`t partin` with it. It would have fit nicely as it is narrow... Just off the phone with my brother and they are gonna get whacked again. He shoveled about a ton of snow off their roof today. Cape Ann was just on the news as they are just down the street. Brr, GFS
|
 |
|
|
Hybrid Mode
