Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 03-16-2016, 05:31 PM
fly4navy fly4navy is offline
Senior Member
 
Join Date: Oct 2012
Location: East Orleans Cape Cod
Posts: 164
Default

Quote:
Originally Posted by Duxbait View Post
I too am interested in the 25. I have seen them on the water many times, and they seem to be nice boats. Just be very careful of the transom on them. I have read and heard reports of transom delimitation due to improper support of the stringers to transom. IMO, it doesn't look like a big job to add support yourself as long as there has been no damage yet. From the photos that I have seen, the stringers tie into the transom, and the older models need the addition of a "bracket" to strengthen the connection of stringers to transom. If you search on thehulltruth you will find a few reports of this happening.
Thanks.
I have read as much as possible on the 25 ft. hulls and can't find anything that the transom issue referenced was a systemic problem. There also seems to be confusion as to whether the issue (as such) pertained to early or late 2000 production years.
Anything that can be added by our knowledgeable fan base would be MOST appreciated.


Thanks!


Fly4
Reply With Quote
  #12  
Old 03-16-2016, 07:05 PM
gofastsandman gofastsandman is offline
Senior Member
 
Join Date: Mar 2007
Location: W.P.B. ,Fl.
Posts: 4,586
Default

Look at the mfr plate.
Was she made in Sarasota?
Reply With Quote
  #13  
Old 03-16-2016, 09:23 PM
Bigshrimpin Bigshrimpin is offline
Senior Member
 
Join Date: Dec 2002
Location: Onset, MA
Posts: 2,712
Default

I got to check out Eric's 25 a few years back and it's a NICE boat. I would definitely consider one if I were in the market.
Reply With Quote
  #14  
Old 03-19-2016, 01:25 PM
fly4navy fly4navy is offline
Senior Member
 
Join Date: Oct 2012
Location: East Orleans Cape Cod
Posts: 164
Default Sea craft 25

Quote:
Originally Posted by gofastsandman View Post
Look at the mfr plate.
Was she made in Sarasota?
Is a Sarasota mfg. site a good thing or a negative?
Reply With Quote
  #15  
Old 03-19-2016, 05:06 PM
gofastsandman gofastsandman is offline
Senior Member
 
Join Date: Mar 2007
Location: W.P.B. ,Fl.
Posts: 4,586
Default

Quote:
Originally Posted by fly4navy View Post
Is a Sarasota mfg. site a good thing or a negative?
I`ve heard there were some teething problems when they moved to Carolina.
Reply With Quote
  #16  
Old 04-18-2016, 08:26 AM
fly4navy fly4navy is offline
Senior Member
 
Join Date: Oct 2012
Location: East Orleans Cape Cod
Posts: 164
Default

Well I look the jump and bought the 25. I had it well surveyed and it appears to be rock solid. I am adding a backup bilge pump, new Garmin GPS, new spreader lights, new fuel gauge, bottom soda blasting and painting as well as other general upkeep items.
I know I have left the fold (though I for the moment am keeping my 20 CC 1974 Potter). I could not find any concrete systemic negatives with the hull. Only was able to gather comments such: "I heard of a guy whose sister's friend's brother had one that had a problem". In any event, I am a Potter fan, but looking forward to a larger base with the nice Seacraft ride.

Will report after first sea trial.
Reply With Quote
  #17  
Old 04-18-2016, 07:09 PM
Terry England Terry England is offline
Senior Member
 
Join Date: Mar 2013
Location: Indian Rocks Beach, Florida
Posts: 895
Default

Quote:
Originally Posted by fly4navy View Post
Well I look the jump and bought the 25. I had it well surveyed and it appears to be rock solid. I am adding a backup bilge pump, new Garmin GPS, new spreader lights, new fuel gauge, bottom soda blasting and painting as well as other general upkeep items.
I know I have left the fold (though I for the moment am keeping my 20 CC 1974 Potter). I could not find any concrete systemic negatives with the hull. Only was able to gather comments such: "I heard of a guy whose sister's friend's brother had one that had a problem". In any event, I am a Potter fan, but looking forward to a larger base with the nice Seacraft ride.

Will report after first sea trial.
You'll be OK if you saw 2" off your seat post to make room for the thicker wallet you'll need - Otherwise, you'll be lookin over the windshield!
Party on Flyboy. You will be able to extend your season safely with that rig.
Reply With Quote
  #18  
Old 04-18-2016, 10:01 PM
fly4navy fly4navy is offline
Senior Member
 
Join Date: Oct 2012
Location: East Orleans Cape Cod
Posts: 164
Default

Terry

I can't help but believe that you must have been (or still are) an expert waterboarder!!!
Reply With Quote
  #19  
Old 04-19-2016, 06:33 AM
Terry England Terry England is offline
Senior Member
 
Join Date: Mar 2013
Location: Indian Rocks Beach, Florida
Posts: 895
Default

Quote:
Originally Posted by fly4navy View Post
Terry

I can't help but believe that you must have been (or still are) an expert waterboarder!!!
Pssst.... We got Bin Laden didn't we?
Signed, "Terrible teasin' Ter"
Reply With Quote
  #20  
Old 04-19-2016, 07:24 AM
kmoose kmoose is offline
Senior Member
 
Join Date: Jul 2006
Location: Ocala, Florida
Posts: 1,817
Default

Many of us with bigger rigs would like the option of a smaller SeaCraft for fun days on the water that don't require the full battle wagon and the 20 does that so well. We live near so many nice rivers and springs that we would love take our families out on but I can't make it under any of the bridges and the shallow parts would be a hazard as well. Trout and red fishing on the flats would be nice to do when the offshore weather is not cooperating but a full dressed 23 is just too much for the most part in those situations. Trust me, your going to miss those options at some point.
__________________
[b]The Moose is Loose !
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft