Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #33  
Old 08-05-2017, 06:09 PM
SailorChlud SailorChlud is offline
Recovered
 
Join Date: Jan 2017
Posts: 359
Default Testing resumes

Today I managed a good run in the bay- 12 nm or so. Using the aluminum
3 blade 15x17p prop we recorded WOT top speed of just 30 knots at 5200 rpm, so this seems to be the right prop for the boat so far. Seemed to cruise nicely with 6 people (our typical max load) and a full tank of fuel. That was with the bimini down.

However, at one point we were running in about 3-4 feet of water (Barnegat Bay is shallow) and we hit something submerged with the prop while at low speed, and put a good 1/4 inch ding in two places on the prop. Razzafrats! No damage to the skeg, though, so not sure what we hit.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft