Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-05-2018, 10:33 PM
jorgeinmiami jorgeinmiami is offline
Senior Member
 
Join Date: May 2005
Location: Miami Fl
Posts: 1,613
Default

No idea of the specs of the motor. Please enlighten me

And no we did not buy the house
Reply With Quote
  #2  
Old 10-06-2018, 07:46 AM
Bigshrimpin Bigshrimpin is offline
Senior Member
 
Join Date: Dec 2002
Location: Onset, MA
Posts: 2,712
Default

In 1991 the first year of the Mercury 2.5L motor. Mercury had an odd duck 2.5L 200hp engine. It had bottom guided 8118 rods, pumper carbs, and a wide 7 petal front half. They put out more than 200hp and were banned from race events. 7 petal front flows a lot better above 7000rpm.

http://www.odbaracing.com/wp-content...BARulebook.pdf
Page 22.

Stock 200 fishing motors allowed.
5)
No Pro Max, 240 Sport Je
t, Motorola, High Performance, Special Production, Back door
or
Custom engine blocks
allowed.
6)
No 1991 model 14 pedal blocks
allowed.
8)
No blocks from Mercury with machined rod
slots.
9)
10 pedal front halves
only.
10)
New motors with taller decked blocks with
o
-
ring heads
allowed.
11)
Only 1 gasket per set of mating surfaces, Maximum thickness
.065"
12)
HP Mercury Parts Allowed (If it is not listed it is not
allowed)
a)
Exhaust Divider Plate to mount
coils.
b)
One
-
piece HP adapter
plate.
c)
HP exhaust
tuner.
d)
HP rods bolts allow
ed. Rod caps may not be machined or ground for
clearance.
e)
HP metal cage rod bearings
allowed.
f)
Aftermarket flywheels
allowed.
g)
Stock High Performance 260 or drag Stator, Trigger, Switch Boxes, and Plug
wires.
h)
Mercury HP ECU allowed. (A
-
2, A
-
4, A
-
5, A
-
6,
A
-
8, A
-
10, A
-
13, A
-
14, A
-
63,
A
-
48)
i)
Mercury HP ECU mounting
Bracket.
j)
Mercury HP Fuel Pump
allowed.
k)
Mercury HP Fuel Regulator
allowed

************************************************
7 petal front (14 petal blocks)


vs.

5 petal front (10 petal blocks)



The 1991 200hp 2.5L engines are most easily recognized by the large single water cooled voltage regulator and the pumper carbs.
Reply With Quote
  #3  
Old 10-06-2018, 12:05 PM
Vezo, Part II Vezo, Part II is offline
Senior Member
 
Join Date: Mar 2012
Posts: 1,026
Default

“7 petal front flows a lot better above 7000rpms “

I like that! The original APBA Jersey Speed Skiffs ran short block Chevy 283’s because they did not require a rev limiter. In the water and out. 60 over they did not last very long, famous for eating valves, which is a very expensive day. But when they were running well, Stupid fun!!!

Vezo, Part II
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:25 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft