Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #22  
Old 04-14-2019, 09:32 PM
FLexpat FLexpat is offline
Recovered
 
Join Date: Jan 2014
Posts: 669
Default

Seacraft hulls need the AV plate high to get clear of the water. BEFORE you go playing around with props, just look over the transom while you are at cruise - if the AV plate is not clear then raise it. Repeat until it is clear. The 23 likes 2-3inches. I have talked with guys running them as much as 3.5 up without a bracket. The 'right' prop with the drive buried is probably not the right prop with the drive in the right place. A buried drive will cost you fuel and speed.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:25 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft