New Merc 300HP-V8 (4.6L)

[kmoose]

Originally Posted by jorgeinmiami

Spoke to my cousin at Bass Outdoor and quoted the 300 at just under $23k with digital

Does that include tax? A Df300 is running $19.5k out the door with digital controls and prop.

[jorgeinmiami]

Not sure

[fredbrad]

Originally Posted by kmoose

Does that include tax? A Df300 is running $19.5k out the door with digital controls and prop.

Installation included?

[kmoose]

Originally Posted by fredbrad

Installation included?

When I had it done it was like $350 for install and in service.

[Snookerd]

Originally Posted by kmoose

Does that include tax? A Df300 is running $19.5k out the door with digital controls and prop.

Last summer Intl Marine was real close to that number - just below 19.5K installed w/ prop and gauge installed and water tested before tax on a deal I set up for a friend.

[kmoose]

Originally Posted by Snookerd

Last summer Intl Marine was real close to that number - just below 19.5K installed w/ prop and gauge installed and water tested before tax on a deal I set up for a friend.

Yep, It's hard to beat Mike's prices. The big issue now is availability. IMS doesn't stock engines so it's based on distributor availability. They can definitely get them but wait times are fluid and folks in a hurry or on a tight schedule need to understand that fact.

[77SceptreOB]

Well I pulled the trigger and have put a deposit on a new Mercury 300hp-V8 (4.6L)! Motor should arrive in 3-4 weeks.

This weekend I plan to demo the transom in prep for an ARJAY poured transom.

[jorgeinmiami]

Congrats on the purchase looking forward to seeing it on your boat. I also did my transom with Arjay and it was easy and is solid as a rock.

I currently have a double secret project that I'm thinking of and keeping it from the Admiral for now. I'm looking at a 23 project and am pulling numbers together to see if I can get away with it and not get thrown out of the house.

[DonV]

Originally Posted by 77SceptreOB

Well I pulled the trigger and have put a deposit on a new Mercury 300hp-V8 (4.6L)! Motor should arrive in 3-4 weeks.

This weekend I plan to demo the transom in prep for an ARJAY poured transom.

Well my jealousy meter is pegged!!!! Congratulations!

[Snookerd]

Originally Posted by DonV

Well my jealousy meter is pegged!!!! Congratulations!

X2 on that jealousy meter.....The SeaCraft gods are pleased. Beast of a motor!!